Ensure the Amp (bottom panel), Cloud panel (blue) and Denon panel (CD Player if using) are switched on.
IF NO MUSIC IS PLAYING
First thing to check – If there is music playing on a device but there is no sound check if the lights on the sound bar are moving, if they ARE showing check the (blue) Cloud panel – switched on / correct source channel is selected. If the lights AREN’T showing the music from the device isn’t being received, check connection from device to stereo.
Below is a check list to run through if there is an issue.
- The power button on the cloud panel (blue) is pushed in.
- The correct channel on the source dial (blue cloud panel) is selected.
- If Using Bluetooth and there’s a reconnection issue – try “forgetting” Aerolink4 and turning your device Bluetooth off and back on again then pairing Aerolink4 again.
- If using CD or own AUX cable make sure the correct one is displayed on the screen.
- If using AUX check the case isn’t in the way.
Cloud Source Channels
- Not In Use
- CD / Own AUX
- Bluetooth
- AUX
- Not In Use
- Not In Use
Waterside Studio Stereo
Step 1
Ensure all sections of the system are switched on, each panel has power lights.
Step 2
Choose music source
Bluetooth
- Turn on the Aerolink unit and ensure the blue lights are flashing.
- Turn on Bluetooth on your device and search for Aerolink4.
- Reconnection issue – if you have connected to this previously and it won’t reconnect try forgetting the “Aerolink4” and turning your device Bluetooth off and back on again then pairing the Aerolink4 again.
- On the blue panel (CLOUD) select channel L3.
AUX – using the cable from the back of the stereo
- Plug AUX cable into headphone socket or adaptor.
- If the device has a case on it, ensure this is not obstructing the cable connection.
- On the blue panel (CLOUD) select channel L4.
AUX – using own cable
- Plug cable into the AUX port located on the black panel.
- Plug AUX cable into headphone socket or adaptor.
- If the device has a case on it, ensure this is not obstructing the cable connection.
- Once the cable is connected use the source button located on the black panel.
- On the blue panel (CLOUD) select channel L2.
CD Player
- On the black panel press the source button until the CD option shows on the display screen.
- Press the eject button next to the CD drawer, insert CD.
- On the blue panel (CLOUD) select channel L2.
- Check the pitch is either off (music will play at usual speed) or on and set to correct pitch using the adjust buttons.
Step 3
Use the volume control on the blue panel, if using Bluetooth or AUX ensure the volume on the device is turned up.
