Ensure the Amp (bottom panel), Cloud panel (blue) and Denon panel (CD Player if using) are switched on.
IF NO MUSIC IS PLAYING
First thing to check – If there is music playing on a device but there is no sound check if the lights on the sound bar are moving, if they ARE showing check the volume on the device is turned up and the correct source channel is selected on the (blue) Cloud panel.
If the lights AREN’T showing, the music from the device isn’t being received, check connection from device to stereo.
Below is a check list to run through if there is an issue.
• The power button on the cloud panel (blue) is pushed in and green light is showing.
• The correct channel on the source dial (blue cloud panel) is selected.
• If using Bluetooth, CD or own AUX cable make sure the correct one is displayed on the Denon screen.
• If using AUX remove case on the device.
Cloud Source Channels
- Not In Use
- Kiosk (Bluetooth)
- Not In Use
- CD / Own AUX
- Not In Use
- AUX
Spin Studio Stereo & Lights
Step 1
Ensure all sections of the system are switched on, each panel has power lights.
Step 2
Choose music source
Bluetooth:
• Bluetooth is connected via the Kiosk – please see Kiosk manual.
• On the blue panel (CLOUD) select channel L2.
• Turn volume up on device.
AUX – using the cable attached to stereo
• Plug AUX cable into headphone socket or adaptor.
• If the device has a case on it, ensure this is not obstructing the cable connection.
• On the blue panel (CLOUD) select channel L6.
AUX – using own cable
• Plug cable into the AUX port located on the black Denon panel.
• Plug AUX cable into headphone socket or adaptor on device.
• If the device has a case on it, ensure this is not obstructing the cable connection
• Once the cable is connected use the source button located on the Denon panel
• On the blue panel (CLOUD) select channel L4
CD Player:
• On the black Denon panel press the source button until the CD option shows on the display screen.
• Press the eject button next to the CD drawer, insert CD
• On the blue panel (CLOUD) select channel L4
• Check the pitch is either off (music will play at usual speed) or on and set to correct pitch using the adjust buttons.
Step 3
Use the volume control on the blue panel, if using Bluetooth or AUX ensure the volume on the device is turned up.
Lights
The light panel is located next to the aircon control near the stereo, select your chosen sequence from the list below. 1-7 are controlling the stripe light and will include Sound to light, number 8 has no stripe lights.
Please leave on channel 7 at the end of the class.
- Still Orange
- Still Blue
- Still Green
- Still Pink
- Changing Rainbow
- Still White
- Slow Fade Rainbow
- Sound To Light Only
