Step 1
Turn off the filter pump, ultraviolet & Spa heating. – Leave Chemical dosing turned on.
Step 2
Turn of the automatic top-up switch via the isolator.
Step 3
Close the skimmer valve.
Step 4
In a clockwise manner turn Multiport to Backwash.
Step 5
Turn on Filter pump and drop water halfway to bottom step.
Step 6
Turn off Filter Pump.
Step 7
In a clockwise manner to the Multiport to Rinse.
Step 8
Turn on Filter Pump and run down to the bottom step.
Step 9
Turn off Filter Pump.
Step 10
In a clockwise manner turn the Multiport to Filter.
Step 11
Turn on the filter pump, ultraviolet & Spa heating.
Step 12
Turn on the automatic top-up valve.
Step 13
DO NOT open skimmer until following morning when the water level has topped up.
Please note
All the pumps must be switched from ‘remote’ to ‘off’ before you leave and to be turned on the following morning after opening the skimmer.
