Ensure the Amp (bottom panel), Cloud panel (blue) and black panel (CD Player if using) are switched on.
IF NO MUSIC IS PLAYING
First thing to check – If there is music playing on a device but there is no sound check if the lights on the sound bar are moving, if they ARE showing check the volume on the device is turned up and the correct source channel is selected on the (blue) Cloud panel.
If the lights AREN’T showing, the music from the device isn’t being received, check connection from device to stereo.
Below is a check list to run through if there is an issue.
- The power button on the cloud panel (blue) is pushed in.
- The correct channel on the source dial (blue cloud panel) is selected. If using Bluetooth, CD or own AUX cable make sure the correct one is displayed on the screen.
- If Using Bluetooth and there’s a reconnection issue – try “forgetting” DN500-CB and turning your device Bluetooth off and back on again then pairing DN500-CB again.
- If using AUX remove case on the device.
Cloud Source Channels
- Not In Use
- Bluetooth / CD
- Not In Use
- AUX
- Not In Use
- Not In Use
Studio One Stereo and Lights
Step 1
Ensure all sections of the system are switched on, each panel has power lights.
Step 2
Choose music source
Bluetooth:
- On the black panel press the source button until “BT Pairing” shows on the display screen.
- Open the Bluetooth option on device and select to connect to DN500-CB.
- Reconnection issue – try “forgetting” DN500-CB and turning your device Bluetooth off and back on again then pairing DN500-CB again.
- On the blue panel (CLOUD) select channel L2.
- For best result leave the device on top of the stereo.
AUX – using the cable from the back of the stereo
- Plug AUX cable into headphone socket or adaptor.
- If the device has a case on it, ensure this is not obstructing the cable connection.
- On the blue panel (CLOUD) select channel L4.
AUX – using own cable
- Plug cable into the AUX port located on the black panel.
- Plug AUX cable into headphone socket or adaptor.
- If the device has a case on it, ensure this is not obstructing the cable connection.
- Once the cable is connected use the source button located on the black panel.
- On the blue panel (CLOUD) select channel L2.
CD Player
- On the black panel press the source button until the CD option shows on the display screen.
- Insert CD and wait for it to register.
- On the blue panel (CLOUD) select channel L2.
Step 3
Use the volume control on the blue panel, if using Bluetooth or AUX ensure the volume on the device is turned up.
Disco and Spotlights
We have two lots of atmospheric lights, Spotlights that cast a warm glow in front of the windows looking out to the car park – to light the instructor. Disco lights which flash in time to the music, they can be separately or together and are switched on at the switches near the stereo (in the window frame)
